KAHRAMANKAZAN / ANKARA, TÜRKİYE
STEEL FORMWORK
SYSTEMS
Project-specific design, structural calculation, manufacturing and site assembly for tunnel formwork and precast moulds. Every unit is built to its own geometry within the 3,000 m² enclosed production area.
WHAT WE MANUFACTURE
STEEL FORMWORK IN
TWO MAIN LINES
Our production is based on project-specific manufacturing rather than stock items. Each mould is dimensioned according to the structure's geometry, the fresh concrete pressure and the intended casting cycle.
01 — TUNNEL AND SYSTEM FORMWORK
BUILDING, BORED AND
CLIMBING FORMWORK
Half-tunnel systems casting wall and slab in one operation, segmented bored tunnel formwork for lining concrete, and climbing systems that rise in lifts.
VIEW
02 — PRECAST ELEMENT MOULDS
PRECAST ELEMENT
MOULDS
Series production moulds for beams, columns, slabs, battery moulds, culverts, barriers, tetrapods and other concrete elements on the factory line.
VIEWPRODUCT GROUPS
WHAT WE PRODUCE
The product groups with site photographs are shown below. The full range is on the products page.
BUILDING TUNNEL FORMWORK
Half-tunnel steel formwork casting load-bearing walls and the slab in a single operation.
VIEW
BORED TUNNEL FORMWORK
Segmented steel formwork for lining concrete in circular and horseshoe section tunnels.
VIEW
TUNNEL TYPE VILLA FORMWORK
A wheeled, adjustable tunnel system casting wall and slab in one operation for villas and terraced housing.
VIEW
PAVILION TYPE VILLA FORMWORK
A rail-mounted closed box mould casting all four walls and the roof slab of a single-volume pavilion or villa in one operation.
VIEW
BEAM MOULD
Steel mould lines for precast reinforced and prestressed concrete beams.
VIEW
CULVERT MOULD
Inner and outer mould set for box culverts and channel elements.
VIEW
TETRAPOD MOULD
Four-legged concrete block mould for breakwaters and coastal protection.
VIEW
BARRIER MOULD
Series production mould for concrete highway barrier elements.
VIEW
COLUMN MOULD
Steel mould for precast and in-situ columns.
VIEW
BRIDGE PIER FORMWORK
Large-section steel formwork for bridge and viaduct piers.
VIEW
PURLIN MOULD
Series production mould for precast roof purlins.
VIEW
SOCKET FOUNDATION MOULD
Steel mould for precast column socket foundations.
VIEW
TRANSFORMER KIOSK MOULD
Inner and outer mould set for monolithic concrete transformer kiosks.
VIEW
CUSTOM FABRICATION & STEEL STRUCTURES
Non-standard moulds, steel structure fabrication and scaffolding systems.
VIEW
CLIMBING FORMWORK
Steel formwork system that rises in lifts for tall walls, shafts, silos and bridge piers.
VIEW
BATTERY MOULD
Vertical multi-cavity mould system for wall panel production.
VIEWHOW WE WORK
FROM DESIGN
TO SITE
The process begins at the engineering stage: fabrication starts only after dimensional survey, three-dimensional modelling and structural calculation.
Design
Mould geometry, division plan and casting cycle are configured per project.
3D modelling
Assembly and stripping sequences are verified on the model before fabrication.
Structural calculation
Fresh concrete pressure and lifting loads are calculated; sections follow.
Manufacturing
Cutting, bending, welding, assembly and coating run on a single line.
Site assembly
First erection is carried out on site by our team, with handover training.
Revision
Existing moulds are adapted when the project layout changes.
Technical support
Support on stripping, maintenance and spare parts throughout service life.
Delivery
Shipment planning and loading are organised by us.
PRODUCT CATALOGUE
TECHNICAL
CATALOGUE
Technical tables for all product groups, application photographs and the full product range list. Turkish and English as separate files.
FOR YOUR PROJECT
SHARE YOUR DIMENSIONS,
LET'S CONFIGURE THE MOULD
Send the dimensions, cycle requirements and budget of your project and we will work out the right formwork configuration with you.