https://www.atikalip.com/en/blog/ Technical articles on tunnel formwork and precast mould systems. en https://www.atikalip.com/en/blog/prekast-nedir https://www.atikalip.com/en/blog/prekast-nedir Thu, 08 Oct 2026 09:00:00 GMT What precast concrete is, how it differs from in-situ casting, the steps it goes through in the plant and which elements are produced. Where the mould fits in. https://www.atikalip.com/en/blog/tunel-kalip-fiyatlari https://www.atikalip.com/en/blog/tunel-kalip-fiyatlari Thu, 08 Oct 2026 09:00:00 GMT The items that make up tunnel formwork cost: steel tonnage, panel thickness, mechanism, surface treatment and engineering. The questions to ask when requesting a quotation. https://www.atikalip.com/en/blog/batarya-kalibi-nasil-calisir https://www.atikalip.com/en/blog/batarya-kalibi-nasil-calisir Wed, 07 Oct 2026 09:00:00 GMT The working principle of the vertical battery mould, how many panels it produces in the same floor area, the steam curing connection, the cycle steps and its advantages over a tilting table. https://www.atikalip.com/en/blog/beton-yuzey-kusurlari https://www.atikalip.com/en/blog/beton-yuzey-kusurlari Wed, 07 Oct 2026 09:00:00 GMT Blowholes, colour variation, honeycombing, fins, bulging and rust staining. The cause of each defect and whether the fix lies in the formwork, the concrete or the practice. https://www.atikalip.com/en/blog/celik-kalip-bakimi https://www.atikalip.com/en/blog/celik-kalip-bakimi Tue, 06 Oct 2026 09:00:00 GMT Cleaning after stripping, correct use of release agent, tie and hinge maintenance, winter storage and deformation checks. A maintenance list that works on site. https://www.atikalip.com/en/blog/st37-st52-celik-secimi https://www.atikalip.com/en/blog/st37-st52-celik-secimi Mon, 05 Oct 2026 09:00:00 GMT The difference between S235 (St 37) and S355 (St 52), which part of the mould uses which, weldability and the cost balance. https://www.atikalip.com/en/blog/toplu-konut-kalip-planlamasi https://www.atikalip.com/en/blog/toplu-konut-kalip-planlamasi Sun, 04 Oct 2026 09:00:00 GMT How many sets are needed, how the storey cycle is calculated, how crane capacity is determined. From block count and programme to the number of sets. https://www.atikalip.com/en/blog/menfez-kalibi-tasarimi https://www.atikalip.com/en/blog/menfez-kalibi-tasarimi Sat, 03 Oct 2026 09:00:00 GMT Inner core, outer form, the role of taper, segmental production, and the difference between in-situ and precast box culvert production. https://www.atikalip.com/en/blog/prekast-kalip-secimi https://www.atikalip.com/en/blog/prekast-kalip-secimi Fri, 02 Oct 2026 09:00:00 GMT How to select a mould type for beams, columns, slabs, wall panels and site elements. Decision steps based on cycle time, surface quality, number of repetitions and plant layout. https://www.atikalip.com/en/blog/tetrapod-nedir https://www.atikalip.com/en/blog/tetrapod-nedir Fri, 02 Oct 2026 09:00:00 GMT How the tetrapod used in breakwaters and coastal protection works, the segmental design of its mould, and the casting and stripping steps. https://www.atikalip.com/en/blog/tunel-kalip-mi-panel-kalip-mi https://www.atikalip.com/en/blog/tunel-kalip-mi-panel-kalip-mi Wed, 30 Sep 2026 09:00:00 GMT The two systems compared on cycle time, labour, crane requirement, initial investment and layout flexibility. Which project calls for which? https://www.atikalip.com/en/blog/taze-beton-basinci-hesabi https://www.atikalip.com/en/blog/taze-beton-basinci-hesabi Fri, 25 Sep 2026 09:00:00 GMT The single input that determines formwork panel thickness is fresh concrete pressure. The logic of the DIN 18218 calculation, the effect of pour rate and temperature, with a worked example. https://www.atikalip.com/en/blog/tunel-kalip-nedir https://www.atikalip.com/en/blog/tunel-kalip-nedir Fri, 18 Sep 2026 09:00:00 GMT Tunnel formwork casts the shear walls and the slab in a single pour. How the system works, half tunnel versus full tunnel, the casting cycle and the projects where it pays off.